Nm-engineering 228860 Bedienungsanleitung PDF herunterladen

NM Engineering ∞ 3300 Corte Malpaso, Camarillo, CA 93012 ∞ 805.388.7171 ∞ 805.388.0030 FAX

engineer@nm-eng.com ∞ www.nm-eng.com!

PARTS INCLUDED: TOOLS REQUIRED:

[2] NM Urethane Inserts [1] Torque Wrench [1] Ratchet Wrench [1] 16mm Socket

[1] Jack [2] Jack Stands [1] 18mm Socket

1. Park car on a flat and level surface capable of supporting

the vehicle’s weight on vehicle jack and jack stands.

Using the manufacturer recommended lifting points, raise

the front of vehicle and support with jack stands under

lifting points. NEVER WORK ON A VEHICLE

SUPPORTED ONLY WITH A JACK!

2. Underneath the vehicle: Remove the 16mm and 18mm

hex bolts to remove engine torque arm from sub-frame.

3. Pull down front of torque arm out of mount, push engine

forward then rotate toward transmission and pull out

from sub-frame.

4. Install NM Engine Torque Arm Inserts into each side of

OE torque arm. Note: Arrow in urethane faces toward

front of vehicle. Red urethane used for picture clarity.

5. Install in reverse of disassembly. Torque bolts 80 ft.-lbs.

ENGINE TORQUE ARM INSERT – NM.228860

[R60] MINI Countryman AWD only 2011-up

DOC. NM.228860 Rev. 03.29.11

Seite 1

NM Engineering ∞ 3300 Corte Malpaso, Camarillo, CA 93012 ∞ 805.388.7171 ∞ 805.388.0030 FAX [email protected] ∞ www.nm-eng.com!!!PARTS INCLUDED: T

Keine Kommentare

Nm-engineering 228860 Bedienungsanleitung