Nm-engineering 228856 Bedienungsanleitung PDF herunterladen

NM Engineering ∞ 3300 Corte Malpaso, Camarillo, CA 93012 ∞ 805.388.7171 ∞ 805.388.0030 FAX

engineer@nm-eng.com ∞ www.nm-eng.com

PARTS INCLUDED: TOOLS REQUIRED:

[2] NM Urethane Inserts [1] Torque Wrench [1] Ratchet Wrench [1] 16mm Socket

[1] Insert Support Bracket [1] Jack [2] Jack Stands

1. Park car on a flat and level surface capable of supporting

the vehicle’s weight on vehicle jack and jack stands. Using

the manufacturer recommended lifting points, raise the

front of vehicle and support with jack stands under lifting

points. NEVER WORK ON A VEHICLE SUPPORTED

ONLY WITH A JACK!

2. Underneath the vehicle: Unbolt the [2] 16mm hex bolts to

remove the engine torque arm.

3. Install NM Engine Torque Arm Insert into each side of OE

torque arm. NOTE: Red urethane used for picture clarity.

4. Install Torque Arm, supplied Support Bracket and torque

bolts to 80 foot/pounds (108nm). Double check installation.

ENGINE TORQUE ARM INSERT – NM.228856

[R55] MINI Cooper S & non-S Clubman 2008-up

[R56] MINI Cooper S & non-S Hardtop 2008-up

[R57] MINI Cooper S & non-S Convertible 2009-up

DOC. NM.228856 Rev. 04.24.12

Seite 1

NM Engineering ∞ 3300 Corte Malpaso, Camarillo, CA 93012 ∞ 805.388.7171 ∞ 805.388.0030 FAX [email protected] ∞ www.nm-eng.com PARTS INCLUDED: T

Keine Kommentare

Nm-engineering 228856 Bedienungsanleitung