Nm-engineering 688856 Bedienungsanleitung PDF herunterladen

NM Engineering ∞ 3300 Corte Malpaso, Camarillo, CA 93012 ∞ 805.388.7171 ∞ 805.388.0030 FAX

engineer@nm-eng.com ∞ www.nm-eng.com!

PARTS INCLUDED: TOOLS REQUIRED:

[1] Titanium Head Shield [3] M5x8mm SS Button Head Bolt [1] 10MM Wrench [1] 13MM Wrench

[2] Aluminum Hex Stand-Offs [3] 5mm SS Washer [1] 3mm Hex Key Wrench

[1] Stainless Steel Support Bracket

1. Using a 10mm wrench, remove turbo housing bolt.

2. Mount supplied SS Support Bracket to turbo housing using

original bolt.

3. Torque bolt to 20Nm (15ft-lbs.). Top surface should be

horizontal. Correct as necessary.

4. Install Hex Stand-offs into threaded ears on cylinder head.

5. Tighten using a 13mm wrench.

6. Mount NM Titanium Heat Shield using M5x8mm SS button

head bolts and M5 SS washers supplied, and then tighten with

3mm hex key wrench. Installation is complete.

DOC. NM.688856 Rev. 09.16.09

TITANIUM HEAT SHIELD – NM.688856

[R55] MINI Cooper S & JCW Clubman 2008-up

[R56] MINI Cooper S & JCW Hardtop 2007-up

[R57] MINI Cooper S & JCW Convertible 2009-up

Seite 1

NM Engineering ∞ 3300 Corte Malpaso, Camarillo, CA 93012 ∞ 805.388.7171 ∞ 805.388.0030 FAX [email protected] ∞ www.nm-eng.com!! PARTS INCLUDED:

Keine Kommentare

Nm-engineering 688856 Bedienungsanleitung